For home jobs

The parts, the tools and the how-to.

Describe the job. We ask the questions a merchant would, send the right parts and any tools you're missing, and step-by-step instructions. If it needs a professional, we say so.

Job plan · Replace a radiator valve
  1. Turn the heating off at the boiler and wait for everything to cool.
  2. Close the lockshield valve, counting the turns so you can reset it later.
  3. Lay towels and a tray under the leaking valve.

Moving a gas pipe? That's a Gas Safe engineer's job. We'll still supply the parts.

An example: a leaking radiator valve

A customer wrote: Need to replace the radiator valve in the front room, it's leaking at the nut. We asked which valve it was, the pipe size, which way the pipe comes in and the finish. Then they got this.

Job plan: Replace a thermostatic radiator valveModerateAbout 2 to 3 hours

Parts

  • Thermostatic radiator valve, 15mm angled, white
  • PTFE thread sealing tape
  • 15mm brass compression olives
  • Central heating inhibitor

Tools

  • Adjustable spanners (x2) I have these
  • Radiator tail spanner
  • Olive puller
  • Radiator bleed key
  • Bucket, tray and old towels I have these

How to do it (17 steps)

  1. Turn the heating off at the boiler and wait for everything to cool.
  2. Close the lockshield valve, counting the turns so you can reset it later.
  3. Lay towels and a tray under the leaking valve.
  4. Drain the system until the water is below the radiator valve.
  5. Hold the valve body with one spanner and undo the union nut and the pipe nut.
  6. Fit the new valve with PTFE tape on the new tail, then tighten while holding the body still.

and 11 more, through refilling, bleeding and checking for drips.

When we'll tell you to get a professional

Some jobs must be done by someone qualified, by law or for safety. For these we don't send instructions, but we can still supply the parts for whoever does the work.

  • Gas Anything on a gas supply, gas appliance or flue (Gas Safe registered engineer)
  • Electrics Consumer units, new circuits and other notifiable electrical work
  • Hot water Unvented hot water cylinders
  • Structure Load-bearing walls and other structural work
  • Asbestos Anything that might disturb it

How it works

  1. Tell usA list of parts, or the job you're doing. Photos and part numbers help.
  2. We find itWe ask anything we need to get it exactly right, and track down suppliers.
  3. You approveOne quote with delivery shown. Nothing is bought until you accept and pay.
  4. DeliveredTo your door or site, tracked, on one invoice.

Questions

What do I get for a job?
We ask a few questions so we get the right parts, then send a job plan: the parts, the tools you'll need, safety points and step-by-step instructions. You tick off the tools you already own and we quote the rest.
Who writes the instructions?
Our team checks every job plan before you see it. They're written for a careful, competent person, not a professional.
When will you tell me to get a professional?
Whenever the law or safety says so: anything on gas or a flue, consumer units and new circuits, unvented hot water cylinders, structural work and asbestos. We won't send instructions for those, but we can still supply the parts for whoever does the job.
Do I have to buy the tools from you?
No. Tick the ones you already have and we leave them off the quote.
When do I pay?
After you accept the quote. Delivery is shown on it as its own line, and nothing is ordered until you've paid.

What are you fixing?

Tell us the job. We'll work out the rest.

Start a job